Samsung MWR-WE13N User Manual page 14

Cooling Operation
If you select the Wind-Free Cooling function in the Fan mode, the
compressor stops working so that cool air does not come out. However,
mild breeze comes out and starts to clean the air in the room.
During the Wind-Free Cooling operation, the cold air may be
intermittently weakened depending on the temperature and humidity
in the room. But the Wind-Free air currents are maintained and the
weakened cold air is immediately recovered, consequently keeping
the room comfortable. (During the Wind-Free Cooling operation, the
air flow blades may open to control the indoor air currents smoothly,
depending on the installation settings. In this case, as soon as the
indoor temperature and humidity change, the air flow blades are
closed and the Wind-Free Cooling operation restarts. For more
information on the installation settings, see "Setting the indoor unit
addresses and the installation options" in the installation manual of
the indoor unit.)
Change of the air flow blade by temperature and humidity
High
Low
Indoor
Breeze comes from
Breeze is blown via
Breeze is blown via
temperature
the air flow blade
the micro holes on the micro holes on
and humidity
depending on the
the air flow blades
the air flow blades
setting
Opened (according
Closed (default)
Air flow blade Closed
to setting)
When the Wind-Free Cooling function runs while sleeping, you may feel
cold air if the air conditioner is installed over the bed. In this case, set
the desired temperature higher than the normal setting temperature.
English
14