Remote Controller Operation
English
12
Controlling air flow direction
You can control air flow direction.
In operation
For the Indoor units that does not support air flow direction control
When you press the
and down. When the air flow blade reaches the desired position,
press the
button again to set the air flow direction.
For 360-cassette indoor unit
Mode
Spot
Wired remote
controller display
Indoor unit
indicator
Some models may not display icons for the air flow directions of
the wired remote controller.
If 360-cassette indoor units and other indoor units are installed
together, the air flow direction does not change on the indoor units
other than 360-cassette when Spot, Mid, or Wide is started as the air
flow direction.
NOTE
You can change the air flow direction by pressing the
The current air flow direction persists even if you change the current
mode, or turn off and then turn on the remote controller.
Duct-type indoor units cannot adjust air flow direction although the
button is pressed, but the
button, the air flow blades move up
Mid
Wide
is displayed instead.
Swing
button.