Audio Settings; Lamp Settings; Test Pattern - BenQ MP515 User Manual

Function
(default setting/value)

Audio Settings

Standby Monitor
Out
(Off)

Lamp Settings

Security
Settings
Baud Rate
(115200)

Test Pattern

(Off)
52 Operation
Mute (Off)
Volume (5)
Power On/Off Ring Tone
See "Adjusting the sound" on page 41
Selecting On enables the function. The projector can output a
VGA signal when it is in standby mode and the COMPUTER 1
(or COMPUTER) and MONITOR OUT jacks are correctly
connected to devices. See
for how to make the connection.
Enabling this function slightly increases the standby power
consumption.
Lamp Mode (Normal)
See "Setting Lamp Mode as Economic" on page 55
Reset Lamp Timer
See "Resetting the lamp timer" on page 59
Equivalent Lamp Hour
See "Getting to know the lamp hour" on page 55
how the total lamp hour is calculated.
Change Password
You will be asked to enter the current password before
changing to a new one. See
on page 27 for details.
Power On Lock (Off)
See "Utilizing the password function" on page 27
Selects a baud rate that is identical with your computer's so
that you can connect the projector using a suitable RS-232
cable and update or download the projector's firmware. This
function is intended for qualified service personnel.
Selecting On enables the function and the projector displays
the grid test pattern. It helps you adjust the image size and
focus and check that the projected image is free from
distortion.
Description
(On)
for details.
"Connecting a monitor" on page 19
for details.
"Utilizing the password function"
for details.
for details on
for details.