Table of Contents
Advertisement
Baud Rate
•
Press ◄/► to select RS-232 baud rate. The options are 2400, 4800, 9600, 14400, 19200,
38400, 57600 and 1152000.
•
Test Pattern
Press ◄/► to select the test pattern. The options are Off, Grid, White, Red, Green, Blue,
Black, RGB Ramps, Color Bar, Step Bars, CheckBoard, Horizental Lines, Vertical Lines,
Diagonal Lines, Horizontal Ramp and Vertical Ramps.
•
Closed Caption
Press ENTER to enter the Closed Caption menu. See
for more details.
Standby Settings
•
Press ENTER to enter the Standby Settings menu. See
page 56
for more details.
•
Network Settings
Press ENTER to enter the Network Settings menu. See
page 56
for more details.
Reset All Settings
•
Press ENTER to reset all settings to default value.
Audio Settings menu
Mute
•
Press ◄/► to enable or disable the mute function.
•
Using the remote control
Press MUTE to temporarily turn off the sound. While the sound is off, the screen will
display in the upper right corner of the screen.
To restore the sound, press MUTE again.
•
Using the OSD menu
1. Press MENU and then press ◄/► until the System Setup: Advanced menu is
highlighted.
2. Press ▼ to highlight Audio Settings and press ENTER. The Audio Settings page displays.
3. Highlight Mute and press ◄/► to select On.
4. To restore the sound, repeat steps 1-3 and press ◄/► to select Off.
54
"Closed Caption menu" on page 56
"Standby Settings menu" on
"Network Settings menu" on
Advertisement
Table of Contents
