Controlling The Projector Remotely Through A Web Browser - BenQ MP515 User Manual

Controlling the projector remotely through a web browser

Once you have the correct IP address for the projector and the projector is on or in
standby mode, you can use any computer that is on the same local area network to
control the projector.
1. Enter the address of the projector in the address bar of your browser and click Go.
2. The remote network operation page opens. This page allows you to operate the
projector as if you were using the remote control or control panel on the projector.
• Menu (Exit)
i
• Auto
• (
• (
• Enter
To switch input source, click on your desired signal.
ii
The source list varies according to the connectors available on the
projector. ''Video 1'' stands for the Video signal; ''S-Video 1'' stands for
the S-Video signal.
ii
• Blank
• Source
) • (
• ( )
)
See "Remote control" on page 12
details.
)
Activates the selected On-Screen
Display (OSD) menu item.
i
for
Operation 43