Setting The Presentation Timer - BenQ MP515 User Manual

Setting the presentation timer

Presentation timer can indicate the presentation time on
the screen to help you achieve better time management
when giving presentations. Follow these steps to utilize
this function:
1. Press Timer Set up on the remote control or go to
the SYSTEM SETUP: Basic > Presentation Timer
menu and press Mode/Enter to display the
Presentation Timer page.
2. Highlight Timer Period and decide the time period by pressing
of time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240
minutes in 5-minute increments.
3. Press to highlight Timer Display and choose if you want the timer to show up
on the screen by press
Selection
Always
1 min/2 min/3 min
Never
4. Press to highlight Timer Position and set the timer position by pressing
5. Press to highlight Timer Counting Direction and select your desired counting
direction by pressing
Selection
Count Up
Count Down
6. Press to highlight Sound Reminder and decide if you want to activate sound
reminder by pressing
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
7. To activate the presentation timer, press
press Mode/Enter.
8. A confirmation message displays. Highlight Yes and press Mode/Enter on the
projector or remote control to confirm. You will see the message "Timer is On!"
displaying on the screen. The timer start counting at the time the timer is on.
/
ing .
Description
Displays the timer on screen throughout the presentation time.
Displays the timer on screen in the last 1/2/3 minute(s).
Hides the timer throughout the presentation time.
Top-Left Bottom-Left
/ .
Description
Increases from 0 to the preset time.
Decreases from the preset time to 0.
/ . If you select On, a double beep sound will be heard at
Top-Right Bottom-Right
and press / to highlight On and
/ . The length
/
.
Operation 37