Advanced Settings - BenQ MP515 User Manual

Main menu Sub-menu
5.
SYSTEM
SETUP:
Advanced
6.
INFORMA-
TION
Note that the menu items are available when the projector detects at least one valid
signal. If there is no equipment connected to the projector or no signal detected, limited
menu items are accessible.
The default values listed in this manual, especially on pages 49-53, are for reference only.
They may vary between the projectors due to the continuous improvement to the
products.
48 Operation
Closed Caption
Enable
Closed Caption
Caption Version
Control By
DHCP
Projector IP
Address
Lan Control
Settings Subnet Mask
Default Gateway
DNS Server
Apply
Reset All Settings
FAQ-Image and Installation
FAQ-Features and Service
Current System Status
Options
On/Off
CC1/CC2/CC3/CC4
RS232/RJ45
On/Off
• Source
• Picture Mode
• Resolution
• Color System
• Equivalent Lamp Hour
• Firmware Version