Setting Menu - BenQ Mainstream MP510 User Manual

Setting menu

FUNCTION
(default setting /
value)
OSD Time
(20)
Blank Timer
(20)
Password
(Off)
Change
Password
Reset
(No)
DESCRIPTION
Sets the length of time the OSD will remain active after your last button
press. The range is from 5 to 100 seconds.
Sets the picture blank time when the Blank feature is activated, once
elapsed the picture will return to the screen.
This is a selectable function. Selecting On limits use of the projector to
only those who know the correct password. When the function is activated
for the first time, you have to set a password for it. For more information,
refer to "Utilizing the password function" on page
is set and this function is selected, the projector is password-protected.
Users who do not know the correct password can not use the projector.
You will be inconvenienced if you activate the password functionality
and subsequently forget the password.
Print out this manual (if necessary) and write the password you used
in this manual, and keep the manual in a safe place for later recall.
The password can be entered by using either the buttons on the projector
or the remote control.
The digits being input will display as asterisks on-screen.
You will be asked to enter the current password before changing to a new
one. For more information, refer to
page 22.
Returns all settings to the factory preset values.
The following settings will still remain: Mirror, Language, Password,
High Altitude Mode, Phase, Horizontal Position, Vertical Position, and
Horizontal Size.
22. Once the password
"Utilizing the password function" on
Operation 37