Picture Menu - BenQ Mainstream MP510 User Manual

Picture menu

Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting /
value)
Picture Mode
(PC: Dynamic;
YPbPr/S-Video/
Video: Standard)
Wall Color
(Off)
Color
Temperature
(depends on the
selected Picture
Mode)
Brightness
(depends on the
selected input
source)
Contrast
(depends on the
selected input
source)
Color
(depends on the
selected input
source)
Tint
(50)
Sharpness
(15)
DESCRIPTION
Pre-defined modes are provided so you can optimize your projector
picture set-up to suit your program type.
You can use the remote control MODE button to select a predefined
Picture Mode. See
Correct the projected picture's color when the projection surface is not
white.
There are four color temperature settings available.
See "Selecting a Color Temperature" on page 28
Adjusts the brightness of the picture.
See "Adjusting Brightness" on page 28
Adjusts the degree of difference between dark and light in the picture.
See "Adjusting Contrast" on page 29
Increases or decreases the color intensity of the picture.
Adjusts the color tones of the picture. The higher the value, the more
reddish the picture becomes. The lower the value, the more greenish the
picture becomes.
When a Video or S-Video signal is connected, the function is only
available with NTSC system selected.
Adjusts the picture to make it look sharper or softer.
"Selecting a picture mode" on page 27
for details.
for details.
for details.
for details.
Operation 35