Remote Control - BenQ Mainstream MP510 User Manual

Remote control

1
2
3
3
4
3
5
1. Power (See
"Shutting down the projector" on page 32
for details.)
Turns the projector on or off.
2. Freeze (See
page 31 for details.)
Freezes the projected picture.
3. Up, Down,
"Using the OSD menus" on page 34
details.)
When the On-Screen Display (OSD)
menu is activated, the buttons are used as
directional arrows to select the desired
menu items and to make adjustments.
4. MENU (See "Using the OSD menus" on
page 34 for details.)
Displays or hides the On-Screen Display
(OSD) menu system.
"Start up" on page 21
"Freezing the picture" on
Left, Right (See
for
5. Keystone
keystone" on page 25
Manually corrects distorted pictures
6
resulting from an angled projection.
6. TIMER On/Show (See
7
presentation timer" on page 29
details.)
Activates or displays an on-screen timer
based on your own timer setting.
8
7. TIMER SETUP (See
presentation timer" on page 29
9
details.)
10
Enters presentation timer setting directly.
8. AUTO (See
11
on page 25
Automatically determines the best
picture timings for the displayed picture.
9. SOURCE (See
on page 24
and
Sequentially selects the input signal D-
Sub/Comp. (Component Video), S-Video
or Video.
10. BLANK (See
30 for details.)
Used to hide the screen picture. Press any
key on the remote control to restore the
picture.
11. MODE (See
on page 27
Sequentially selects a predefined picture
setting available for each input.
(See page "Correcting
for details.)
"Setting the
for
"Setting the
for
"Auto-adjusting the picture"
for details.)
"Switching input signal"
for details.)
"Hiding the picture" on page
"Selecting a picture mode"
for details.)
Introduction 11