Table of Contents
Advertisement
3. Setting menu
FUNCTION
DESCRIPTION
Toggles projector audio between on and off.
Mute
Adjusts audio volume level. The default volume level is 5.
Volume
Sets the length of time the OSD will remain active after your last button
OSD Time
press. The range is from 5 to 100 seconds.
Returns all settings to the factory preset values.
Reset
This is a selectable function. Selecting
only those who know the correct password. When the function is activated
for the first time, you have to set a password for it. For more information,
refer to
is set and this function is selected, the projector is password-protected.
Users who do not know the correct password can not use the projector.
Password
The password can be entered by using either the buttons on the projector
or the remote control.
You will be asked to enter the current password before changing to a new
Change
one. For more information, refer to
Password
page
"Utilizing the password function" on page
WARNING: You will be inconvenienced if you activate the password
functionality and subsequently forget the password.
Print out this manual (if necessary) and write the password you used
in this manual, and keep the manual in a safe place for later recall.
The password will display on-screen when being input.
22.
limits use of the projector to
22. Once the password
"Utilizing the password function" on
Operation
33
Advertisement
Table of Contents
