Controls And Functions - BenQ Mainstream MP510 User Manual

Controls and functions

Projector
1. Focus ring (See
clarity" on page 26
Adjusts the focus of the projected picture.
2. Temperature warning light (See
"Indicators" on page 45
Lights red if the projector's temperature
becomes too high.
3. Power indicator light (See
page 45 for details.)
Lights up or flashes when the projector is
under operation.
4. Power (See
"Shutting down the projector" on page 32
for details.)
Turns the projector on or off.
5. Keystone/Arrow buttons (
Right)
Manually corrects distorted pictures
resulting from an angled projection.
Selects the desired menus and to make
adjustments.
See "Correcting keystone" on page 25
"Using the OSD menus" on page 34
details.
6. BLANK (See
30 for details.)
Used to hide the screen picture.
10 Introduction
"Fine-tuning the picture
for details.)
for details.)
"Indicators" on
"Start up" on page 21
/ Left,
"Hiding the picture" on page
1
2
3
4
5
6
7
7. MODE (See
on page 27
Sequentially selects a predefined picture
setting available for each input.
8. EXIT (See
page 34 for details.)
Exits and saves the menu settings.
Selects the desired menu items.
9. Lamp indicator light (See
page 45 for details.)
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
and
problem.
10. AUTO (See
on page 25
Automatically determines the best
/
picture timings for the displayed picture.
11. SOURCE (See
page 24 for details.)
Sequentially selects the input signal D-
Sub/Comp. (Component Video), S-Video
or Video.
and
12. MENU (See
for
on page 34
Turns on the On-Screen Display (OSD)
menu.
Selects the desired menu items.
8
9
10
5
11
12
"Selecting a picture mode"
for details.)
"Using the OSD menus" on
"Indicators" on
"Auto-adjusting the picture"
for details.)
"Switching input signal" on
"Using the OSD menus"
for details.)