Panasonic DMR-UBT1 Operating Instructions Manual page 54

Conversion Setting for Streaming
• On:
When playing back on Home Network
feature compatible equipment, this
setting reduces the chance of break-ups
and freezing of an image by lowering the
image quality.
Resolution Setting for Streaming
When "Conversion Setting for Streaming"
is set to "On", select the image quality.
Registration type for remote devices
• Automatic:
All connected devices on the same
network can access this unit.
• Manual:
Only registered devices can access this
unit.
Remote device list
• To register equipment manually
1 Select the device name or the MAC
Address for the device you want to
register, then press [OK].
2 Select "Yes", then press [OK].
• To deregister equipment
Select the registered equipment, then
press [OK].
• This function cannot be enabled when
"Automatic" is selected in "Registration type for
remote devices". (
• The maximum number of equipment that can be
registered is 16.
Legal Notices
Displays the "Terms and Conditions of Use /
Privacy Policy".
Your use of internet-enabled functions and
software updates must follow the rules set forth
in the "Terms and Conditions of Use". Please
review "Terms and Conditions of Use" and
"Privacy Policy" carefully and confirm your
understanding of "Privacy Policy" and agreement
to the "Terms and Conditions of Use" by
checking the box and select "OK".
54
TQBS0291
above)
Others
Standby Settings
Quick Start
• On:
It is possible to start quickly from standby.
• Off:
Power consumption in standby is minimised.
( 63) However, startup time from standby
will be longer.
• Timer Setting for Quick Start:
"Quick Start" is activated when the set time
comes.
• When "Home Network function" (
Anywhere" ( 53) is set to "On", the setting for this
function is fixed to "On".
• If "Off" or "Timer Setting for Quick Start" is selected, the
setting for "Front Panel Display" in "Display" is fixed to
"Automatic". ( 51)
Automatic Standby
When the unit is not operating, the unit will be
turned to standby once the set time has passed.
Automatic Standby after OTR
• On:
This unit is turned to standby when it is not
operated for approximately 5 minutes after
completion of recording.
Automatic Standby after Copy
• On:
This unit is turned to standby when it is not
operated for approximately 5 minutes after
completing copy.
RF OUT ( Aerial Signal )
Set whether to output the broadcasting signal
from RF OUT or not while in standby (When
"Quick Start" is not activated).
53), "TV