Basic Settings - Panasonic DMR-UBT1 Operating Instructions Manual

Basic Settings

You can change the unit's settings below.
1
Press [FUNCTION MENU].
2
Select "Basic Settings" in "Setup", then press
[OK].
Basic Settings
DVB Tuning
HDD / Disc / USB HDD
Picture
Sound
Display
Connection
Network
Others
OK
RETURN
3
Select the menu, then press [OK].
4
Select the item, then make the setting.
To return to the previous screen
Press [RETURN ].
DVB Tuning
Favourites Edit
You can create four favourites of channels for
making viewing and recording easier.
After editing as follows, save the Favourites.
Press [RETURN ], then press [OK].
• To select the other Favourites list:
Press the green button.
• To add channels to the Favourites list:
Select the channel in the "All DVB Channels"
column, then press [OK]. Repeat this step.
• Red: Change the sorting mode.
• Yellow: Add continuous block of channels to
the list at once.
• Press [3, 4] to make the block, then press
[OK].
• Blue: Select the Category.
• To change the order of the channels list:
1 Select the channel to move, press the green
button.
2 Select the new position, then press the
green button.
48
TQBS0291
• To delete channels:
Select the channel, press [OK].
• Yellow: Delete all channels.
• To change the name of the Favourites list:
1 Press the red button.
2 Press [3, 4, 2, 1] to select a character,
then press [OK].
Repeat this step to enter other characters.
• Red: Delete a character.
• Blue: Delete all characters.
3 Press [RETURN
Channel List
You can edit the channel list.
• To hide unwanted channels
1 Select the channel.
2 Press [OK].
The check mark is removed.
• Red: Change the sorting mode.
[alphabetical order (A. B. C...) etc.]
• Yellow: Reveal all channels.
• Blue: Change the Category.
• To move the channel number assignment
1 Select the channel to move, then press the
green button.
2 Enter the channel number to reassign with
the number buttons.
3 Press [OK].
Auto Setup
You can restart the Auto Setup. (
Select "Yes", then press [OK].
• The timer recording programmes are cancelled.
Manual Tuning
You can add new channels manually.
1 Press [3, 4] to select the physical channel.
• Adjust the frequency by checking the signal
strength and signal quality.
2 Press [OK] to start scan.
• The set channel is displayed in the table.
Update Channel List
You can update the channel list to the latest one.
].
9)