Panasonic DMR-UBT1 Operating Instructions Manual page 37

3
Set the picture quality (
1 Select "Picture Quality", then press
[1] (right).
2 Set "Picture Quality".
3 Press [2].
• Even if you copy HEVC programmes to a
BD-RE/BD-R using Copy (Keep Picture Quality), the
copied programmes may not be played back on other
equipment.
4
Register programmes for copy.
1 Select "Create List", then press
[1] (right).
2 Select "New item", then press [OK].
3 Select the programme, then press the
yellow button.
Repeat this step to select programmes.
4 Press [OK].
5 Press [2].
Data size of each registered programme
Destination Capacity: 3200 MB
Size: 0 MB ( 0% )
No. Size Programme
New item (Total=0)
Page 01/01
5
Make other settings.
1 Select "Other Settings", then press
[1] (right).
• Other Settings item does not appear
depending on the copying mode.
2 Select the copying option, then press
[OK].
( 36, Setting the copying options)
3 Select the item, then press [OK].
4 Press [2].
6
Select "Start Copying", then press [OK].
7
Select "Yes", then press [OK].
To cancel all registered copying settings and
lists
After performing step 1
1 Select "Cancel All", then press [OK].
2 Select "Yes", then press [OK].
68).
Data size recorded to
the copy destination
• Programmes in the grouped programmes and other
programmes cannot be registered simultaneously.
To edit the copying list
1 Select the programme after step 4-4 (
2 Press [OPTION].
3 Select the item (Add, Move etc.), then press
[OK].
To change the appearance of the list or show
information of the programme
1 Press [OPTION].
2 Select the item, then press [OK].
• The programmes will be copied in the order of the copying
list. If you want to specify the order, edit the copying list
after the programmes are selected. (
copying list)
Screen icons
UHD programmes that will be
converted to HD picture quality
before being copied
Programmes that can be copied to
discs using Copy (Change Picture
Quality)
§
Programmes that can be copied to
the HDD using Copy (Change
Picture Quality)
Programmes that cannot be copied
to disc
Programmes that cannot be copied
to HDD
Programme recorded using a
different encoding system from that
(NTSC)
of the unit
• Programmes displaying these
marks cannot be selected.
(PAL)
The amount of time needed for a picture quality change is
§
the same as the length of the programme to be copied.
About other screen icons (
left).
above, To edit the
§
23)
37
TQBS0291