Panasonic DMR-UBT1 Operating Instructions Manual page 50

Chapter Creation
Set the Chapter Creation method.
• Even if "Automatic" is selected, depending
on the programme to be recorded, the
chapter may not be created correctly.
Disc Speed for Copy
Select the speed for Copy (Keep Picture
Quality).
HDD Management
Press and hold [OK] for 3 seconds to show the
following settings.
Delete all programmes
Delete all recorded programmes and AVCHD
on the built-in HDD.
• Delete does not work if one or more
programmes are protected.
Delete all videos ( MP4 / MKV )
Delete all videos (MP4/MKV) on the built-in
HDD.
Delete all photos
Delete all music
Delete all photos/music on the built-in HDD.
Format HDD
Formatting deletes all contents on the
built-in HDD, and they cannot be restored.
Check carefully before proceeding.
Settings for USB HDD
USB HDD Registration
Register the USB HDD. (
USB HDD Disconnection
This function puts the USB HDD in a state in
which it can be safely disconnected. (
USB HDD Management
Press and hold [OK] for 3 seconds to show
the following settings.
Delete all programmes
Delete does not work if one or more
programmes are protected.
50
TQBS0291
22)
22)
Format USB HDD
Formatting deletes all contents, and
they cannot be restored. Check
carefully before proceeding.
Cancellation of all USB HDD Registrations
This function cancels the registrations of all
the USB HDDs registered on this unit.
Only do this if you are going to dispose of this
unit.
• Before operation, perform "USB HDD Disconnection"
( left) and remove the USB HDD.
Picture
Still Mode
Select the type of picture shown when you pause
play.
• Field:
Select if jittering occurs when "Automatic" is
selected. (The picture is coarser.)
• Frame:
Select if small text or fine patterns cannot be
seen clearly when "Automatic" is selected.
(The picture is clearer and finer.)
Sound
Dynamic Range Compression
To lower the dynamic range for playback (e.g., at
night).
• This does not work depending on broadcasts
and recorded programmes.
Downmix
Select the downmix system of multi-channel to
2-channels sound.
• Select "Surround encoded", when the
connected equipment supports the virtual
surround function.
• There is no effect on "Bitstream" via HDMI AV
OUT terminal.
Bilingual Audio Selection
Select whether to record the audio type ("M1" or
"M2").