Panasonic DMR-UBT1 Operating Instructions Manual page 10

Easy Network Setting
After completing "Easy Setting", you can continue
with "Easy Network Setting".
Follow the on-screen instructions to establish
your connection settings.
Select "Wired" or "Wireless", then press [OK].
LAN cable connection ("Wired")
Follow the on-screen instructions to apply your
connection settings.
Wireless LAN connection ("Wireless")
Before beginning wireless connection setup
• Obtain your network name (SSID
• If your wireless connection is encrypted, please
be sure that you know your encryption key.
• The default SSID , Password (Key) etc., may
§1
be printed on the router.
e.g.,
Then follow the on-screen instructions and apply
the settings.
Search for wireless network:
The available wireless networks will be displayed.
Select your network name and press [OK].
– If your network name is not displayed, search
again by pressing the red button on the remote
control.
– Stealth SSID will not be displayed. Enter the
§2
SSID manually by using "Wireless Settings".
( 52)
• If your wireless network is encrypted, Encryption
Key input screen will be displayed.
Input the encryption key of your network.
10
TQBS0291
).
§1
SSID XXXXXXXXXXXX
KEY XXXXXXXXXXXX
PIN XXXXXXXXX
PUSH button method
If your wireless router supports the PUSH button
method , you can easily perform the settings by
§3
pressing Link button on it.
1 Press the green button on the remote control.
2 Press Link button or corresponding button of
wireless router until the lamp starts flashing.
• For details, refer to the operating instructions
of wireless router.
3 Press [OK].
e.g.,
Link button
In your use of internet functions
Your use of internet-enabled functions and
software updates must follow the rules set forth
in the "Terms and Conditions of Use".
Please review "Terms and Conditions of Use"
and "Privacy Policy" carefully and confirm your
understanding of "Privacy Policy" and agreement
to the "Terms and Conditions of Use" by
checking the box and select "OK".
( 54, Legal Notices)
To restart Easy Network Setting
Perform "Easy Network Setting" in "Basic
Settings". ( 52)
To redo settings individually
If "Easy Network Setting" did not work properly or
when you change the settings individually,
perform "Network Settings" in "Basic Settings".
( 52)
Check security before using Home Network
function
If you set "Home Network function" to "On", all
connected devices on the same network can
access this unit. Ensure that the router for your
home network has adequate security system to
prevent unauthorised access.
:
§3