Panasonic DMR-UBT1 Operating Instructions Manual page 14

To set the recording time
1 Select "Recording Time" or "Continuous
recording" in step 3 (
Recording Time: (30 minutes - 4 hours)
• You can select the recording time with
[2, 1].
2 Press [OK].
To change the recording mode (picture
quality)
This unit can record programmes in DR mode and
then automatically change their recording mode
(picture quality) to another setting while in
standby.
1 Press [OPTION].
2 Select "Recording Mode".
3 Select the recording mode, then press [OK].
• Recording mode (Picture Quality) (
Recording Mode ( Picture Quality )
HDD Remain HD
High
Definition
Standard
Definition
• The recording mode set here is used as the
default value for the next recording.
• Programmes in the original picture quality
(DR mode) will be deleted after their
recording mode is changed.
To change the recording mode after recording
in DR mode ( 33, Picture Quality Change)
• When the HDD does not have enough remaining space, the
recording mode change function does not operate.
• It takes about the same amount of time as recording to
change the recording mode.
• A recording mode change stops when this unit is turned on.
The process will start from the beginning again after the unit
is switched to standby.
• If you switch to a recording mode other than DR mode,
UHD programmes (4K) will be down-converted to HD
programmes (2K).
14
TQBS0291
13).
68)
h m (DR)
DR(Original)
HG
HX
HE
HL
HM
XP
SP
LP
OK
RETURN
Operation during recording
To check the recording programme
Press [STATUS ].
e.g., While recording two programmes simultaneously
HDD
Recording programme
REC1/OTR AUTO
displayed on the TV
5 REC2
Recording programme not displayed on the TV
To stop recording
Press [∫].
When recording one programme:
If the following screen appears
Stop Recording
1
Recording of this programme is in progress.
Stop this recording ?
Yes
Select "Yes", then press [OK].
When recording two programmes:
1 Select the programme, then press [OK].
2 Select "Yes", then press [OK].
To pause recording
After displaying the recording programme, press
[;].
• Press again to restart recording.
(A programme is not split into separate
programmes.)
• Timer recording programme cannot be paused.
No
OK
RETURN