Panasonic DMR-UBT1 Operating Instructions Manual page 52

Aspect for 4:3 Video
To play a 4:3 content, set how to show pictures
on a 16:9 TV.
• 4:3:
Picture output expands left or right.
• 16:9:
Picture is output as original aspect with side
panels.
TV System
Set in accordance with the TV System for the
connected TV.
HDMI Connection Settings
Video Format
You can only select items compatible with the
connected equipment.
• If "Automatic" is selected, the output
resolution best suited to the connected TV
(4K, 1080p, 1080i, 720p or 576p/480p) is
automatically selected.
4K(50p/60p) Output
This unit automatically chooses to output
images in 4K (50p/60p) when connected to a
4K (50p or 60p) compatible TV.
• This item is available only when "Video
Format" is set to "Automatic" and "4K".
• To connect to a TV that supports 4K
(50p/60p) 4:4:4/8 bit or 4K (50p/60p)
4:2:2/12 bit, select "4K(50p/60p) 4:4:4".
• Images will not be output correctly with an
HDMI cable that does not support 18 Gbps.
• To connect to a TV that supports 4K (50p/60p)
4:2:0/8 bit, select "4K(50p/60p) 4:2:0".
24p Output
When playing BD-Video recorded in
24 frames, this unit displays each frame at
1/24 second intervals–the same interval
originally shot with the film movie.
• When this unit is connected to TV compatible
with 4K/24p and "Video Format" is set to
"Automatic", images will be output in 4K/24p.
• When this unit is connected to a TV
compatible with 1080/24p and "Video
Format" is set to "Automatic", "1080i" or
"1080p", images will be output in 1080/24p.
52
TQBS0291
Advanced Settings
Colour Mode
This setting is for selecting colour-space
conversion of the image signal.
Deep Colour Output
Set the output method to be used when
this unit is connected to a TV that supports
Deep Colour.
HDR (High Dynamic Range) Output
Output images in HDR (High Dynamic
Range) format depending on the content
and connected TV.
HLG / PQ Conversion
When this unit is connected to a TV that
supports only HDR (PQ) format, set
whether or not to convert in HLG format to
PQ format.
Contents Type Flag
If "Automatic" is selected, the method of
playback optimised (e.g. cinema) will
automatically be selected (only when the
TV supports Contents Type Flag).
Network
For information about "Legal Notices" (
Easy Network Setting
You can set the Easy Network Setting. (
Network Settings
LAN Connection Mode
Select the LAN connection method.
• When not using wireless LAN (when turning
it off), select "Wired".
Wireless Settings
This allows to set and check the connection
settings of the wireless router.
Refer to "Wireless LAN connection
("Wireless")" ( 10)
54)
10)