Deactivating Ebl And Vrm - Raytheon NSC 18 User Manual

Bearing and cursor
Place the cursor on EBL 1, press the Right trackball button.
Find the desired target and press the Left trackball button.
°
127.9
EBL1
T Bearing / distance and toggle field with slider
Depending on the toggle field, the bearing (EBL) or the distance (VRM) can be
edited by moving the slider (see chapter 2.2.4.4).
Bearing / distance and operator panel
This alternative method of operation allows the EBL1/VRM1 function to be
displayed or adjusted quickly. Pressing the toggle switch releases the rotary dials
for the operation.
The EBL and VRM status LEDs light up.
The EBL/VRM is always placed at your own position.
Parallel movement is not possible when using the operator panel.
Adjust the EBL/VRM rotary dials to change the bearing (EBL) or the variable
range area (VRM).
Right dial Left dial
The variable range area is directly linked to the range rings (RNG) and
adapted accordingly in the display.
2.3.4.3

Deactivating EBL and VRM

The EBL/VRM displays can be hidden by selecting the toggle field again.
Position the cursor on the desired toggle field.
Press the Left button.
Edition: 14.JAN.2005
NSC 18
RADAR
Operator Manual
2−49
R
Raytheon Marine GmbH
Germany
3748DOC020102