Modulator
transmitter−
receiver
(XCVR...)
assignment
Figure: 2−7 NSC Radar in STANDBY mode −System configuration diagram
−
STBY
Switching the radar ON
Using the trackball, place the cursor on the STBY softkey and press the Left
button on the trackball.
The name of the softkey changes to Tx and is highlighted.
Tx
After 1..2 scans the radar video is displayed in the PPI area.
All settings for optimization of the system can be made by using the toggle fields
and softkeys that are constantly available.
Edition: 14.JAN.2005
NSC 18
RADAR
Operator Manual
. . .
2−9
R
Raytheon Marine GmbH
Germany
Operating hours
counter
Radar display as-
signment
3748DOC020102