Toggle Fields - Raytheon NSC 18 User Manual

2.2.4.3

Toggle fields

The toggle field functionalities are called up by pressing the trackball buttons
or alternatively (partially) using the buttons on the operator panel.
+
Example:
−
The range is increased by clicking on the (+) button and decreased using the (−)
or
button.
2.2.4.4 Sliders
The slider settings can be analog or made in steps.
Analog slider setting
Slider
For analog setting, the cursor must be positioned on the slider for the desired
GAIN
function (e.g. GAIN).
Press and hold the trackball button, move the trackball.
Tuning
bar
The slider is moved to the right or the left, according to the trackball direction
and
Left
(see concurrent tuning bar display). The slider setting is transferred to the
Press
radar video immediately.
and
hold
Steps, slider setting using trackball
For this setting, the cursor must be positioned in the open area of the slider
Slider
frame (e.g. GAIN).
GAIN
Pressing the trackball button moves the slider gradually towards the cursor
and
position (see concurrent tuning bar display).
Left
The slider setting is transferred to the radar video immediately.
Press
Slider settings are individual. Within the NSC technology, these values are
treated as transient values.
Transient values cease to be valid after switching to STBY or switching off
the unit. When the unit is switched on again, the sliders are set to their
default values.
3748DOC020102
Operator Manual
NOTE
2−18
Edition: 14.JAN.2005