System Reset - Raytheon NSC 18 User Manual

2.2.5

System reset

When a system reset is carried out, only the NSC software is re−initialized; the
transceiver remains actuated.
Power ON/OFF
button
Procedure:
Trigger the system reset. Press the dipswitch briefly with a pointed object.
Peak item The display turns dark briefly and the system is re−initialized.
Reset
The NSC display appears with the following basic settings.
Dip
Switch
After any restart, the NSC display unit makes certain basic settings. These
include
Edition: 14.JAN.2005
NSC 18
RADAR
Operator Manual
− TUNE in AUTO mode
− GAIN in center position
− SEA in 0 position
− RAIN in 0 position
− FTC in 0 position
− DIMMER in max. position
− Range in 6NM
− Vector at 6.0 min
2−21
R
Raytheon Marine GmbH
Germany
3748DOC020102