Wan Ip Address - ActionTec GT701-WG User Manual

Actiontec 54 Mbps Wireless DSL Gateway User Manual
4. In the next screen, read the recommendations. To perform an advanced setup
on the Gateway, click Begin Advanced Setup.
5. The "Configuring the Advanced Settings" screen appears. To check all the set-
tings, or if unsure of which settings to modify, select Next. To modify a spe-
cific configuration, click on its name in the menu bar on the left.
☞
Note: To save changes made in any of the Advanced Setup
screens, click Save and Restart at the bottom of the gray menu
on the left side of the screen.

WAN IP Address

Address in the "Advanced Configuration" screen generates the
Selecting
WAN IP
" Address" screen.
WAN IP
of the Gateway. There are five ways to do this: Transparent Bridging, Obtain an
Address through
IP
Address through
Address allows manual set up of the IP address
WAN IP
o , Obtain an
PPP E
, and Specify a Static
DHCP
Address Through
IP
Address.
IP
58
, Obtain an IP
PPPoA