Table of Contents
Advertisement
Actiontec Wireless-Ready DSL Gateway User Manual
4. In the next screen, read the recommendations. To perform an advanced setup
on the Gateway, click Begin Advanced Setup.
5. The "Configuring the Advanced Settings" screen appears. To check all the set-
tings, or if unsure of which settings to modify, select Next. To modify a specif-
ic configuration, click on its name in the menu bar on the left.
Note: Click Save and Restart on the bottom left-hand side of
the screen after finishing the configuration of one or more of
the Advanced Setup settings.
WAN IP Address
Selecting
Address in the "Advanced Configuration" screen generates the
WAN IP
"
Address" screen.
WAN IP
of the Gateway. There are three ways to do this: Obtain an
o
, Obtain an
PPP
E/PPPoA
Address.
Note: Some
munication with an end user, while others use static
Address allows manual set up of the IP address
WAN IP
Address Through
IP
providers use
DSL
PPP
38
Address through
IP
, and Specify a Static
DHCP
o
to establish com-
E/PPPoA
IP
IP
. Cable
Advertisement
Table of Contents
