Table of Contents
Advertisement
Actiontec USB/Ethernet DSL Gateway User Manual
4. In the next screen, read the recommendations. To perform an advanced setup
on the Gateway, click Begin Advanced Setup.
5. The "Configuring the Advanced Settings" screen appears. To check all the set-
tings, or if unsure of which settings to modify, select Next. To modify a spe-
cific configuration, click on its name in the menu bar on the left.
☞
Note: To save changes made in any of the Advanced Setup
screens, click Save and Restart at the bottom of the gray menu
on the left side of the screen.
WAN IP Address
Selecting
Address in the "Configuring the Advanced Settings" screen gen-
WAN IP
erates the "
WAN IP
IP address of the Gateway. There are five ways to do this: Transparent Bridging,
Obtain an
Address through
IP
Obtain an IP Address through
☞
Note: Some
munication with an end user. Other types of broadband Internet
connections (such as fixed point wireless) may use either
or static
DHCP
present, check with the Internet Service Provider (
continuing.
Address" screen.
WAN IP
o
PPP
E
DHCP
providers use
DSL
address. If unsure about which connection is
IP
Address allows manual set up of the
, Obtain an
Address Through
IP
, and Specify a Static
o
to establish com-
PPP
E/PPPoA
38
PPPoA
Address.
IP
before
ISP)
,
Advertisement
Table of Contents
