Static IP Address
on the Computer
To communicate with the Gateway from a computer on the network (to use the
Web Configuration Utility, for example), the user may have to switch the
settings from
DHCP
on the same subnet.
To set up static
IP
instructions.
☞
Note: The following procedures are based on the Gateway's
factory default
changed, enter the new
address.
IP
Windows 98 SE
1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
-enabled to static
on a computer, select the operating system and follow the
address. If the Gateway's
IP
IP
, so that the computer and the Gateway are
IP
IP
address when instructed to enter an
105
B
address has been
address
IP