Lan Ip Address; Dhcp Server - ActionTec GT701-WG User Manual

Actiontec 54 Mbps Wireless DSL Gateway User Manual

LAN IP Address

Selecting LAN IP Address in the "Advanced Configuration" screen generates the
"LAN IP Address" screen.
The values in the "LAN IP Address" and "Netmask" text boxes are the IP address
and Subnetmask of the Gateway as seen on the network. These values can be
modified for your LAN network, but Actiontec recommends keeping the default
factory settings (IP Address 192.168.0.1 Subnetmask 255.255.255.0).
☞
Note: If the Gateway's
Server range is within the same subnet. For more infor-
DHCP
mation, see "
After changing settings, click Next or Back to continue, or Save and Restart to
make all changes permanent.

DHCP Server

Selecting Server in the "Advanced Configuration" screen generates
DHCP
the " Server" screen. The Gateway has a built-in
DHCP
Configuration Protocol) server that automatically assigns a different
each computer on the network, eliminating
The factory default setting is On. To disable the
Address is modified, verify the
LAN IP
Server Configuration."
DHCP
DHCP
address conflicts.
IP
Server, select Off.
DHCP
68
(Dynamic Host
address to
IP