York OPTIVIEW Operation Manual page 75

FORM 160.78-O2
ISSUE DATE: 5/22/2017
Pulldown Demand Limit
Access Level Required: OPERATOR
Allows the user to specify the current limit value (as
a percentage of Full Load Amps) to which the chiller
will be limited during the specified pulldown limit
time. This value will override the Input Current Limit
value during this time period. This function is used to
provide energy savings following chiller start-up.
Pulldown Demand Time
Access Level Required: OPERATOR
Allows the user to set a period of time for which the
pulldown demand limit will be in effect after the chiller
starts.
Print
Generates Setpoints print report.
JOHNSON CONTROLS
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
NAVIGATION
Home
Causes an instant return to the Home Screen.
Setup
Moves to the subscreen allowing setup of general sys-
tem parameters.
2
75