York OPTIVIEW Operation Manual page 71

FORM 160.78-O2
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
ISSUE DATE: 5/22/2017
Manual Increment
Access Level Required: SERVICE
Sets the increment by which the motor cooling valve
command will be adjusted when in manual control
Open/Close
Access Level Required: SERVICE
2
Changes the motor cooling valve command by one
unit of the manual increment setting. Changes control
to Manual.
Set
Access Level Required – SERVICE
Allows for input of a specific command percentage to
the motor cooling valve. Changes control to Manual.
Auto
Access Level Required – SERVICE
Shown only when motor cooling is in Manual. Chang-
es back to Automatic control.
71
JOHNSON CONTROLS