Smooth Fitness CE 7.4 User Manual page 14

Step 6:
Attach the Accessory Tray Bracket (96) to Handrail – Left (7) and Handrail – Right (8) with two M6 x 12mm Screw (105) as
shown in FIG.11.
Connect the Wire Harness – Top (109) to the Wire Harness – Upper (111) and the Hand Pulse Sensor Wires – Top (116) to
the Hand Pulse Sensor Wires – Upper (117) as shown in FIG.12.
Attach the Console Housing (1) to the Handrail – Left (7) and Handrail – Right (8). First fit the fringe of Accessory Tray (45) to
the Rubber Ring (44) on the Handrail – Left (7) and Handrail – Right (8). Then secure the Accessory Tray Bracket (96) to the
Accessory Tray (45) with two M6 x 15mm Bolt (77) and two M6 Nylon Nut (86) as shown in FIG.13. Then secure the Console
Housing (1) using two M6 x 20mm Screws (104) as shown in FIG.14.
NOTE: Make sure all wires are recessed into the Console Housing, do not trap or pinch any of the wires.
77
7
86
44
44
96
SMOOTH CE 7.4 ELLIPTICAL TRAINER
45
8
Fig 13
Visit us at: www.smoothfitness.com
14
ASSEMBLY
109
111
1
116
109
117
8
111
7
44
116
116
117
117
Fig 12
7
105 96
1
104
Fig 11
8
7
Fig 14