Smooth Fitness CE 7.4 User Manual page 12

12
SMOOTH CE 7.4 ELLIPTICAL TRAINER
ASSEMBLY
STEP 4:
First connect the Wire Harness – Upper (111) to the Wire Harness – Middle (118) and Hand Pulse Sensor Wire –Upper (117)
to the Hand Pulse Sensor Wire – Middle (9) as shown in FIG 7.
Attach the Handrail – Left (7) to the Side Upright – Left (5) and secure using two M8 x 45mm Allen Head Bolts (59).
Make sure all wires are recessed into the Upright, do not trap or pinch any of the wires.
NOTE:
59
7
117
111
118
9
Fig 7
5
Visit us at: www.smoothfitness.com