Smooth Fitness CE 7.4 User Manual page 13

13
SMOOTH CE 7.4 ELLIPTICAL TRAINER
ASSEMBLY
STEP 5:
Connect the Hand Pulse Sensor Wire – Upper (117) and Hand Pulse Sensor Wire – Middle (9) as shown in FIG.10.
Attach the Handrail – Right (8) to Side Upright – Right (6) and secure using two M8 x 45mm Allen Head Bolts (59) as shown
in FIG.8. Then secure the Handrail – Left (7) to the Handrail – Right (8) with one M8 x 15mm Bolt (74) as shown in FIG.9.
Make sure the wire is recessed into the Upright, do not trap or pinch the wire.
NOTE:
8
74
Fig 9
7
59
74
59
8
8
117
6
Fig 8
6
9
Fig 10
Visit us at: www.smoothfitness.com