Technical Data; Technical Data For Gearbox - Siemens SINAMICS S 1PH7 Configuration Manual

Motor components (options)
5.4 Gearbox
5.4.4

Technical data

Table 5- 6

Technical data for gearbox

ZF Motor Order No.
designation
shaft
height
2K120 100 2LG4312-...
2K250 132 2LG4315-...
2K300 160 2LG4320-...
2K800 184 2LG4250-...
3)
2K801 186 2LG4260-...
3)
2K802 225 2LG4570-...
Higher maximum speed from 8000 ... 9000 rpm for more than 20% on-period is only possible with injection lubrication.
1)
Permissible with gearbox oil cooling for gearbox stage i = 1.
2)
Can be supplied with holding brake (option).
3)
NOTICE
When designing the complete drive unit (motor with gear) the gearbox data is decisive.
For example, for the 1PH7167-2NB motor, the torque should be reduced to 300 Nm. For
motors, shaft heights 100 and 132, the maximum motor speed should be limited to the
permissible gearbox speed 2K120/2K250.
For other binding technical data and engineering information/instructions (e.g. lubrication,
temperature rise, permissible radial forces and examples), please refer to Catalog from ZF
Friedrichshafen AG.
198
n [rpm] Rated torque [Nm]
max
(S1 duty)
Drive Output
i=1
8000 120 120
1)
9000
2)
6300 250 250
8000
2)
6300 300 300
8000
2)
5000 800 800
5000 800 800
5000 800 800
Maximum torque [Nm]
(S6 duty, 10 min. cycle
duration, max. 60 % on
period)
Drive Output
i=4 i=1
480 140 140
1000 400 400
1200 400 400
3200 900 900
3200 900 900
3200 900 900
1PH7 induction motors (Machine tools)
Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
Weight Output
[kg] housing
a10
[mm]
i=4
560 30 100
1600 62 116
1600 70 140
3600 110 200
3600 110 200
3600 110 200