Information Regarding Third-Party Products; Environmental Compatibility - Siemens SINAMICS S 1PH7 Configuration Manual

Preface

Information regarding third-party products

NOTICE
This document contains recommendations relating to third-party products. This involves
third-party products whose fundamental suitability is familiar to us. It goes without saying
that equivalent products from other manufacturers may be used. Our recommendations are
to be seen as helpful information, not as requirements or regulations. We cannot accept
any liability for the quality and properties/features of third-party products.

Environmental compatibility

● Environmental aspects during development
● Environmental aspects during production
● Environmental aspects for disposal
10
When selecting supplier parts, environmental compatibility was an essential criteria.
Special emphasis was placed on reducing the envelope dimensions, mass and type
variety of metal and plastic parts.
Effects of paint-wetting impairment substances can be excluded (PWIS test)
Supplier parts and the products are predominantly transported in re-usable packing.
Transport for hazardous materials is not required.
The packing materials themselves essentially comprises paperboard containers that are
in compliance with the Packaging Directive 94/62/EC.
Energy consumption during production was optimized.
Production has low emission levels.
Motors must be disposed of carefully taking into account domestic and local regulations
in the normal recycling process or by returning to the manufacturer.
The following must be taken into account when disposing of the motor:
Oil according to the regulations for disposing of old oil (e.g. gear oil when a gearbox is
mounted)
Not mixed with solvents, cold cleaning agents of remains of paint
Components that are to be recycled should be separated according to:
– Electronics scrap (e.g. encoder electronics, sensor modules)
– Iron to be recycled
– Aluminum
– Non-ferrous metal (gearwheels, motor windings)
1PH7 induction motors (Machine tools)
Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0