Flange Mounting; Flange Mounting With Threaded Studs And Nuts - Siemens SINAMICS S 1PH7 Configuration Manual

Flange mounting

For shaft heights 100 to 160 and with type of construction IM B35, it is only possible to flange
mount the motor using cylinder head screws.
For SH 180 to 225, flange mounting is only possible using studs and nuts. Clearance M1 for
threading the nut or screw between the motor flange and motor frame acc. to DIN 42948.
Table 7- 3
1PH7 induction motors (Machine tools)
Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0

Flange mounting with threaded studs and nuts

Shaft height M1 [mm]
100
132
160
180
225
44
50
65
32
91
Information for using the motors
7.5 Mounting
227