Drive Belt(S) - Subaru Legacy 2002 Service Manual

Periodic Maintenance Services

6. Drive Belt(s)

A: INSPECTION
1. EXCEPT 3.0 L MODEL
1) Replace belts, if cracks, fraying or wear is
found.
2) Check drive belt tension and adjust it if neces-
sary by changing generator installing position
and/or idler pulley installing position.
Belt tension
(A)
replaced: 7 — 9 mm (0.276 — 0.354 in)
reused: 9.0 — 10.0 mm (0.354 — 0.394 in)
(B)*
replaced: 7.5 — 8.5 mm (0.295 — 0.335
in)
reused: 9.0 — 10.0 mm (0.354 — 0.394 in)
*: There is no belt (B) on models without an air
conditioner.
C/P Crankshaft pulley
GEN Generator
P/S Power steering oil pump pulley
A/C Air conditioning compressor pulley
I/P Idler pulley
DRIVE BELT(S)
SA07684
SA07684A10
SA07684A1003
GI0019B
2. 3.0 L MODEL
1) Replace belts, if cracks, fraying or wear is
found.
2) Check that the V-belt automatic tensioner indi-
cator is within the range (D).
(A) Indicator
(B) Generator
(C) Power steering oil pump
(D) Service limit
PM-10
SA07684A1002
B2M4014A