Water Pump - Subaru Legacy 2002 Service Manual

5. Water Pump

A: REMOVAL
S176061A18
1) Disconnect ground cable from the battery.
2) Lift-up the vehicle.
3) Remove under cover.
4) Drain engine coolant completely.
<Ref. to CO-13, DRAINING
COOLANT, REPLACEMENT, Engine Coolant.>
5) Disconnect connectors from radiator main fan
motor (A) and sub fan motor (B).
WATER PUMP
S176061
G6M0095
B2M2920
OF ENGINE
B2M2923A
6) Disconnect radiator outlet hose and heater
hose from water pump.
7) Lower the vehicle.
8) Remove air intake duct.
9) Disconnect over flow hose.
10) Remove reservoir tank.
11) Remove radiator main fan and sub fan assem-
blies. <Ref. to CO-26, REMOVAL, Radiator Main
Fan and Fan Motor.> and <Ref. to CO-29,
REMOVAL, Radiator Sub Fan and Fan Motor.>
CO-15
Cooling
B2M2924
B2M2922
B2M2925
B2M2926