Table of Contents
Advertisement
9.2.2 Removing doors with pins
Open the door completely and insert the pins (supplied) into the slots from the inside. Close the door to
an angle of about 45° and lift it to remove it. To remount the door, fit the hinges into their grooves, then
lower the door into place and extract the pins. In case you lose the pins, two screwdrivers can also be
used.
9.3 Removing the internal glass panes
WARNING
The glass in the door should always be kept thoroughly clean. For easier cleaning, it is possible to
remove the door (see 9.2 Removing the oven door) and place it on a canvas; or open it and block the
hinges in order to extract the glass panes.
The glass panes of the door can be completely removed by following the instructions provided below.
Removing the internal glass:
•
Remove the internal glass pane by pulling it
towards you, following the movement indicated
by the arrows. Doing this dislodges the 4 pins
attached to the glass from their slots in the
oven door.
Removing the middle glass panes:
•
Remove the middle panes by lifting them
upwards.
28
Instructions for the user
Before removing the glass panes, make sure that at least one of the door's hinges
has been locked in the open position as described in paragraph "9.2 Removing the
oven door". This operation might have to be repeated during the glass removal
process if the door is accidentally freed.
Do not use the appliance without the glass inserted, otherwise the external
surface of the door will overheat.
Advertisement
Table of Contents
