Electromagnetic Compatibility Guidelines; Unpacking The Kit - National Instruments USB-6008 User Manual

Caution
be flammable gases or fumes. If you must operate the device in such an
environment, it must be in a suitably rated enclosure.

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits provide reasonable protection against harmful interference when the product is
operated in the intended operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with
radio and television reception and prevent unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.
Caution
shielded cables and accessories.
Caution
in the operational environment when test leads are attached or when the product is
connected to a test object.
Caution
product is connected to a test object.
Note Changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate the product under your local
regulatory rules.

Unpacking the Kit

Caution
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Caution
Do not operate the device in an explosive atmosphere or where there may
To ensure the specified EMC performance, operate this product only with
This product may become more sensitive to electromagnetic disturbances
Emissions that exceed the regulatory requirements may occur when this
To prevent electrostatic discharge (ESD) from damaging the device,
Never touch the exposed pins of connectors.
NI USB-6008/6009 User Guide | © National Instruments | 3