Electromagnetic Compatibility Guidelines - National Instruments NI 9230 Getting Started Manual

3 ai, ±30 v, 24 bit, 12.8 ks/s/ch simultaneous

Hide thumbs Also See for NI 9230:

Table of Contents

Caution

accessible only by the use of a tool.

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory

requirements and limits for electromagnetic compatibility (EMC)

stated in the product specifications. These requirements and

limits provide reasonable protection against harmful interference

when the product is operated in the intended operational

electromagnetic environment.

This product is intended for use in industrial locations. However,

harmful interference may occur in some installations, when the

product is connected to a peripheral device or test object, or if the

product is used in residential or commercial areas. To minimize

interference with radio and television reception and prevent

unacceptable performance degradation, install and use this

product in strict accordance with the instructions in the product

documentation.

The enclosure must have a door or cover

Table of Contents