Pinout And Signal Descriptions - National Instruments USB-6008 User Manual

Table 4. NI USB-6008/6009 Cables and Accessories
Accessory
USB-6008/6009 Accessory
Kit
USB-6000 Series
Prototyping Accessory
Hi-Speed USB Cable
Caution
this product must be operated with shielded cables and accessories. If unshielded
cables or accessories are used, the EMC specifications are no longer guaranteed
unless all unshielded cables and/or accessories are installed in a shielded enclosure
with properly designed and shielded input/output ports.

Pinout and Signal Descriptions

The following figure shows the pinout of the NI USB-6008/6009. Analog input signal names
are listed as single-ended analog input name, AI x, and then differential analog input name,
(AI x+/-). Refer to the following table for a detailed description of each signal.
Part Number
779371-01
779511-01
184125-01,
184125-02
For compliance with Electromagnetic Compatibility (EMC) requirements,
Four additional screw-terminal
connectors, connector labels, and a
screwdriver
Unshielded breadboarding accessory for
custom-defined signal conditioning and
prototyping. You can use up to two
accessories per device.
1 m and 2 m lengths
NI USB-6008/6009 User Guide | © National Instruments | 9
Description