Electromagnetic Compatibility Guidelines - National Instruments NI 9236 Getting Started Manual

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory
requirements and limits for electromagnetic compatibility (EMC)
stated in the product specifications. These requirements and
limits provide reasonable protection against harmful interference
when the product is operated in the intended operational
electromagnetic environment.
This product is intended for use in industrial locations. However,
harmful interference may occur in some installations, when the
product is connected to a peripheral device or test object, or if the
product is used in residential or commercial areas. To minimize
interference with radio and television reception and prevent
unacceptable performance degradation, install and use this
6 | ni.com | NI 9236 Getting Started Guide
hnology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www
The system shall be mounted in an
Caution
ATEX/IECEx-certified enclosure with a minimum
ingress protection rating of at least IP54 as defined in
IEC/EN 60079-15.
The enclosure must have a door or cover
Caution
accessible only by the use of a tool.