Datasheet
Contents
Installation ................................................................................................................................4
Install the Software ........................................................................................................... 4
Connect the Signals .......................................................................................................... 6
Run Test Panels ................................................................................................................ 10
Terminal Block Removal.......................................................................................................... 13
Module Removal....................................................................................................................... 14
Create a Simulated Device........................................................................................................ 15
More Information...................................................................................................................... 16
Troubleshooting ................................................................................................................ 16
Calibration Interval ........................................................................................................... 16
Electrical ........................................................................................................................... 16
Mechanical........................................................................................................................ 17
Physical ............................................................................................................................. 17
Shock and Vibration ......................................................................................................... 18
Safety Voltages ................................................................................................................. 19
Safety Standards ............................................................................................................... 19
CE Compliance ................................................................................................................. 20
Environmental Management............................................................................................. 20
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits provide reasonable protection against harmful interference when the product is
operated in the intended operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with radio
and television reception and prevent unacceptable performance degradation, install and use this
product in strict accordance with the instructions in the product documentation.
Amplicon.com
Sales:
+44 (0) 1273 570 220
IT and Instrumentation for industry
Website:
www.amplicon.com
Email:
sales@amplicon.com