Figure 53 Wrapping A Layer Of Pvc Insulating Tape; Figure 54 Wrapping Three Layers Of Water Insulating Tape - Zte ZXMBW E9230 User Manual

F 53 W
IGURE RAPPING A
2. Wrap three layers of waterproof insulating tape.
i. Expand the waterproof insulating tape and strip off release
paper. The adhesive tape sticks to the connector or the
feeder which is 20~50 mm away from the lower end of
grounding kit.
ii. Extend the adhesive tape to up to 1/2 – 3/4 of the former
width, in order to keep a certain extension strength. Bind
the feeder in an overlapping way from lower to upper, and
the upper adhesive tape should cover a half of the lower
adhesive tape, as shown in
F 54 W
IGURE RAPPING
(
THE FIRST LAYER
Note:
The wrapping direction should be towards the direction of
connector screwed down. Prohibit wrapping in a reverse
direction.
iii. While wrapping to the 20~50 mm position off the connector
, repeat it for twice and the sequence respectively is: from
upper to lower as shown in
upper as shown in
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 Equipment Installation
L PVC I
AYER OF
Figure 54.
T L
HREE AYERS OF
)
Figure 55
Figure 56.
T
NSULATING APE
W I T
ATER NSULATING APE
and from lower to
57