Figure 12 Flags Field Format; Figure 13 R6 Control Plane Protocol Stack; Table 9 Flags Field Description - Zte ZXMBW E9230 User Manual

ZXMBW E9230 User Manual
Control Plane
Protocol Stack
Physical Layer
16 Confidential and Proprietary Information of ZTE CORPORATION
Field
Source Identifier TLV
TLVs
Figure 12 illustrates the detailed format of the Flags field.
F 12 F F
IGURE LAGS IELD
Table 9 lists the Flags fields and their description.
T 9 F F D
ABLE LAGS IELD
Field
r
T
R
Figure 13 illustrates the structure of the R6 control plane protocol
stack.
F 13 R6 C
IGURE ONTROL
A logical connectivity between L2/L3 of two control plane protocol
stacks enables communication between the two functional entities.
The encapsulation of IP packets between the two functional enti-
ties relies on the connectivity type, such as
of the encapsulated packet contains address information, which
ensures that the packet can be sent to the correct physical entity.
The physical layer of the R6 interface supports packet access and
Time Division Multiplexing (TDM) access.
the message to the destination
identifier without changing it.
Length-variable source entity
identifier, for example, the
network ID of a functional entity
that originates the message.
A triplet following the message
head.
F
ORMAT
ESCRIPTION
Description
Reserved bit, which must be set to 0. The
receiver should ignore the reserved bit.
If this bit is configured, the message
should contain Source Identifier TLV and
Destination Identifier TLV.
Resets the next expected Transaction ID.
P P S
LANE ROTOCOL TACK
Description
GRE tunnel. The seal