Figure 24 Installing M8×80 Expansion Bolt - Zte ZXMBW E9230 User Manual

ii. Lead an expansion tube through the expansion bolt and
slightly tighten the nut. Insert them vertically into the hole
and use a claw hammer to strike the expansion bolt into
the hole. Screw down the nut to make the expansion tube
expanded enough and then remove the nut, as shown in
Figure 24.
F 24 I
IGURE NSTALLING
3. Install a supporting panel on the wall.
Fix the supporting panel on the wall with bolts as shown in
Figure 25.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 Equipment Installation
M8×80 E B
XPANSION OLT
35