Figure 46 Antenna Installation Position - Zte ZXMBW E9230 User Manual

ZXMBW E9230 User Manual
Steps
52 Confidential and Proprietary Information of ZTE CORPORATION
F 46 A I
IGURE NTENNA
1. Lightning rod
2. 45° Lightning protection area
Following are lightning protection requirements to install an an-
tenna:
� The antenna should be installed with in 45° coverage area of
lightning rod.
� If there is no special lightning protection arrangement like the
above, install the lightning protection system onto the antenna
pole.
� Make sure that the lightning rod is well grounded.
Note:
This section introduces the installation process of directional an-
tenna briefly. Refer to the installation guide delivered with the
antenna for detailed installation steps.
1. Assemble parts of directional antenna.
Firstly assemble fastener "C" onto the upper and lower ends
of antenna as shown in
and "A" to complete the initial installation of the directional
antenna.
P
NSTALLATION OSITION
3. Antenna
4. Grounding cable
Figure 47. Then mount fasteners "B"