Mercedes-Benz AMG GT 53 4MATIC+ 2019 Operator's Manual page 415

Position jack 2 at jack support point 1.
#
Turn ratchet wrench 3 clockwise until jack
#
2 sits completely on jack support point
and the base of the jack lies evenly on the
ground.
Continue to turn ratchet wrench
#
tire is raised a maximum of 1.2 in (3 cm) off
the ground.
Loosen and remove the wheel (
#
Removing a wheel
Requirements:
The vehicle is raised (
R
Vehicles with AMG ceramic high-perform‐
ance composite braking system:
* NOTE Damage to the ceramic brake disk
when changing a wheel
Mercedes-AMG vehicles with ceramic
brake disks: during removal and reposition‐
ing of the wheel, the wheel rim may strike
the ceramic brake disk and damage it.
Take particular care.
#
Ask another person for assistance or
#
use a second centering pin.
1 When changing a wheel, avoid applying any force
to the brake discs, since this could impair the
level of comfort when braking.
3 until the
page 413).
→
* NOTE Damage to threading from dirt on
page 411).
→
#
#
#
#
#
#
Wheels and tires 413
wheel bolts
Do not place wheel bolts in sand or on
a dirty surface.
Unscrew the uppermost wheel bolt com‐
pletely.
Screw alignment bolt 1 instead of the
wheel bolt into the threading.
Unscrew the remaining wheel bolts fully.
Remove the wheel.
Install the new wheel ( page 414).
→