Mercedes-Benz AMG GT 53 4MATIC+ 2019 Operator's Manual page 272

270 Multimedia system
Storing and calling up measurement values
When a measurement has been completed or
canceled, the measured time can be stored.
After a measurement, select
#
ment? .
The stored measurements can be displayed via
the History menu item.
Editing measurements
Select History.
#
Highlight the desired measurement.
#
Select Ü options.
#
Select Weather or Delete.
#
% The measurements can be displayed by cate‐
gory, e.g. acceleration measurements, by
applying a filter.
Calling up the telemetry display
Multimedia system:
Vehicle TRACK PACE
, .
The telemetry display shows current vehicle data
as a digital value and as a diagram. Up to four
parameters can be selected that are to be
shown in the display.
For example:
Save measure-
Engine speed
R
Wheel angle
R
Speed
R
Steering angle
R
Set the desired parameters.
#
Set the time.
#
The set parameters are evaluated in the dia‐
gram for the time set.
% The time can range from a minimum of 30
seconds to a maximum of 20 minutes.
Configuring AMG TRACK PACE
Requirements
To use the TRACK PACE app:
the TRACK PACE app is installed on the
R
Telemetry
. mobile end device.
the mobile end device is connected to the
R
multimedia system via Wi-Fi.
Multimedia system:
Vehicle TRACK PACE
, .
Setting driver profiles
Select Driver Profile.
#
Create a new driver profile.
#
or
Select an existing driver profile.
#
The driver profile is activated.
% Tracks, laps and times driven are assigned to
the active driver profile while driving. For an
exact evaluation of your driving style, you
should always drive with an active driver pro‐
file.
Displaying driver profile statistics
Select Driver Profile.
#
Select the desired profile.
#
The following information is displayed for the
selected driver profile:
driving time
R
track driven
R
Options
.